OperationD8X Only D8C Vend/Load/Unload Drops & Buy Change Door Operation Reports Add/Remove Users Communication Rules Diagnostic Screen Add Devices Remove Devices Device Search Device Sync Lantronix Setup Configuring Definitions Naming Things Clock Store Info Printing Options User Options D8C Vend Max Vend Locks Cash Service Error Messages Max Vend Electrical D8C Electrical V1/V2 Electrical Power Lock Systems D8C Vend Assembly D8X Vend Assembly Hopper System MEI 3900 Validators CashCode Validators JCM Validators Parts Lists Max Vend V1/V2 D8C D8X |
D8C Operating InstructionsVending1. Press VEND.2. Present key or enter a valid USER NUMBER and press ENTER. 3. Enter a valid PIN number. 4. Select the column number to vend from. 5. Receive the tube from the dispensing tray and take receipt. Loading TubesThis procedure is normally used by Managers only.1. Move the tube lock to the open position. 2. Press LOAD. 3. Present key or enter a valid USER NUMBER and press ENTER. 4. Enter a valid PIN number. 5. When prompted to LOAD TUBES, begin inserting tubes. Ensure tubes are closed securely. Observe the tube value total on the screen for errors. 6. When done loading tubes press ESC to exit and print receipt. One full minute of inactivity will also end the load operation and the report will print automatically. 7. Verify static tube totals by printing a CASH REPORT. 8. Return the tube lock to the locked position. Unload ProcedureThis procedure is normally used by Managers only.1. Press UNLOAD. 2. Present key or enter a valid USER NUMBER and press ENTER. 3. Enter a valid PIN number. 4. If there is an unload delay, the safe will beep when the delay is complete. Repeat Steps 1 through 3. 5. Select the column to unload, or select ALL to unload all columns. 6. Retrieve tubes as they are dispensed. 7. When the unload receipt prints, the unloaded column(s) are reset to zero tubes. |
|
Copyright
©2009 Updated 4-16-09 |
||