FKI Tech Info

Operation
D8X Only
D8C Vend/Load/Unload
Drops & Buy Change
Door Operation
Reports
Add/Remove Users

Communication
Rules
Diagnostic Screen
Add Devices
Remove Devices
Device Search
Device Sync
Lantronix Setup

Configuring
Definitions
Naming Things
Clock
Store Info
Printing Options
User Options
D8C Vend
Max Vend
Locks
Cash

Service
Error Messages
Max Vend Electrical
D8C Electrical
V1/V2 Electrical
Power
Lock Systems
D8C Vend Assembly
D8X Vend Assembly
Hopper System
MEI 3900 Validators
CashCode Validators
JCM Validators

Parts Lists
Max Vend
V1/V2
D8C
D8X

AuditLok XLV Operating Instructions

Open Door to Remove Cash Without Armored Car

1. Log In (Identifier & PIN)
2. Press DOORS.
3. Select YES to REMOVE CASH.
4. Select the name of cash to remove.
5. If the door(s) involved has a delay, wait for the door delay to complete. When the door delay has finished the display(s) will beep.
6. If there was a delay, repeat steps 1-4.
7. When opening the controller unit, open the door immediately. When opening a remote unit, go to the remote unit and turn the fire key, then immediately open that door.
8. If a Macro Cash was selected, repeat Step 7 for each door that is part of the Macro.
9. A deposit report (a.k.a. door receipt) will print. When using Macro Cash, a completed report will print when the last door is opened.

Open Door to Remove Cash - Armored Car Pickup

1. If the armor car pickup applies only to "R" units and the armor car company is the holder of the Medeco remote unit door key, use the NORMAL PROCEDURE TO REMOVE CASH above. Proceed if the armor car uses an electronic ACO key to override timelocks/delays on various system doors.
2. Present the ACO (#8) key.
3. Log In (Identifier & PIN)
4. Press DOORS.
5. Select YES to REMOVE CASH.
6. Select the name of cash to remove.
7. When opening the controller unit, open the door immediately. When opening a remote unit, go to the remote unit and turn the fire key, then immediately open that door.
8. If a Macro Cash was selected, repeat Step 7 for each door that is part of the Macro.
9. A deposit report (a.k.a. door receipt) will print. When using Macro Cash, a completed report will print when the last door is opened.

Open Door Without Removing Cash

1. Log In (Identifier & PIN)
2. Press DOORS.
3. Select NO to REMOVE CASH.
4. Select the name of safe where the door is located.
5. If the safe chosen has more than one door, select the name of the lock for the door.
6. If the door(s) involved has a delay, wait for the door delay to complete. When the door delay has finished the display(s) will beep.
7. If there was a delay, repeat steps 1-5.
8. When opening the controller unit, open the door immediately. When opening a remote unit, go to the remote unit and turn the fire key, then immediately open that door.