OperationD8X Only D8C Vend/Load/Unload Drops & Buy Change Door Operation Reports Add/Remove Users Communication Rules Diagnostic Screen Add Devices Remove Devices Device Search Device Sync Lantronix Setup Configuring Definitions Naming Things Clock Store Info Printing Options User Options D8C Vend Max Vend Locks Cash Service Error Messages Max Vend Electrical D8C Electrical V1/V2 Electrical Power Lock Systems D8C Vend Assembly D8X Vend Assembly Hopper System MEI 3900 Validators CashCode Validators JCM Validators Parts Lists Max Vend V1/V2 D8C D8X |
AuditLok XLV CommunicationInventory/Communication DiagnosticCheck inventory and data bus communication using the Diagnostic screen:1. At the idle screen press ESC. 2. Select DEVICES. 3. Interpret the information displayed as shown in the screen example below. All other information beyond what is shown below may be ignored. In the case of displays (shown at the end of the inventory cycle), only the Display Address is shown (Display Address is one two-digit number). 4. Select NEXT to cycle forward to the next board in the system. Reading and Understanding a Soft AddressLock boards, main vend boards and validator boards (UIBs) have a soft address made up of three parts. These parts include the unit number, board number, and board type.Device Number — The C-unit is always Device 00. The first R-unit in inventory is Device 01, the second R-unit is Device 02, and so on. Board Number (C-unit) — The first board found in a C-unit by the CPU during a Device Search is Board 00. The second board found is Board 01, the third is Board 02, and so on. Board Number (R-unit) — The UIB connected to the external data bus is always Board 00. The next board is Board 01, the third is Board 02, and so on. Board 00 establishes its own inventory of boards inside the R-unit and reports this inventory to the CPU at the time the R-unit is added. Board Type — A lock board is Type 01. A UIB (validator board) is Type 02. A main vend board is Type 03.
|
|
Copyright
©2009 Updated 4-16-09 |
||
