OperationD8X Only D8C Vend/Load/Unload Drops & Buy Change Door Operation Reports Add/Remove Users Communication Rules Diagnostic Screen Add Devices Remove Devices Device Search Device Sync Lantronix Setup Configuring Definitions Naming Things Clock Store Info Printing Options User Options D8C Vend Max Vend Locks Cash Service Error Messages Max Vend Electrical D8C Electrical V1/V2 Electrical Power Lock Systems D8C Vend Assembly D8X Vend Assembly Hopper System MEI 3900 Validators CashCode Validators JCM Validators Parts Lists Max Vend V1/V2 D8C D8X |
AuditLok XLV Max Vend Configuration ProgrammingHopper ValuesUse this procedure to set the value of each hopper. Hopper values are the “per tube/roll” value.1. Log into PGRM. 2. Select “DEVICES.” 3. Select the Max Vend safe. 4. Select “MAX VEND.” 5. Select “HOPPER VALUE.” 6. Select the hopper to edit. 7. Enter a new tube/roll value for the hopper. Press ENTER when done. 8. Press “ESC” to return to the idle screen. Vend TillWhen the Vend Till feature is configured users with vend permission may vend a till of change at one time once per twelve hour period. The purpose is to allow employees to open a till at the beginning of their shift without opening a safe door.1. Log into PGRM. 2. Select “DEVICES.” 3. Select the Max Vend safe. 4. Select “MAX VEND.” 5. Select “VEND TILL.” 6. Select the first hopper, then enter the number of tubes/rolls for a till. Repeat for each hopper. Press ENTER when done. 7. Press “ESC” to return to the idle screen. Vend Delay1. Log into PGRM.2. Select “DEVICES.” 3. Select the Max Vend safe. 4. Select “MAX VEND.” 5. Select “VEND DELAY.” 6. Enter the new vend delay (in minutes). A value of 00 disables the vend delay. Press ENTER when done. 7. Press “ESC” to return to the idle screen. |
|
Copyright
©2009 Updated 4-16-09 |
||