OperationD8X Only D8C Vend/Load/Unload Drops & Buy Change Door Operation Reports Add/Remove Users Communication Rules Diagnostic Screen Add Devices Remove Devices Device Search Device Sync Lantronix Setup Configuring Definitions Naming Things Clock Store Info Printing Options User Options D8C Vend Max Vend Locks Cash Service Error Messages Max Vend Electrical D8C Electrical V1/V2 Electrical Power Lock Systems D8C Vend Assembly D8X Vend Assembly Hopper System MEI 3900 Validators CashCode Validators JCM Validators Parts Lists Max Vend V1/V2 D8C D8X |
AuditLok XLV Clock Configuration ProgrammingTime & DateEvery entry in the audit is logged with date and time stamp information. It is important for security, proper application of delay and timelocks, and life safety for the clock to be properly set. The AuditLok XLV system will compensate automatically for daylight savings once enabled.1. Log Into PGRM. 2. Select “TIME/DATE.” 3. Select “TIME.” 4. Enter the correct time (24-hour format), then press ENTER. 5. Select “DATE.” 6. Enter the correct date (MMDDYY format), then press ENTER. 7. Press “ESC” to return to the idle screen to verify time and date information. Daylight Savings TimeWhen daylight savings is enabled the system clock will automatically adjust each Spring and Fall at the correct time.1. Log into PGRM. 2. Select “SITE.” 3. Select “DAYLIGHT SAVINGS.” 4. If the site is in a region that uses Daylight Savings select YES (star *), otherwise select NO. Press ENTER when done. 5. Press “ESC” to return to the idle screen. Note: Version 4.12 and later support the 2007 US DST schedule. Earlier versions support the old US DST schedule. |
|
Copyright
©2009 Updated 4-16-09 |
||