FKI Tech Info

Operation
Login
Change PIN
Open Doors
Manage Users
Audit Report
Config Report

Configuration
Daylight Savings
System Clock
Door Setup
Delay & Timelock
Lockout Schedule
Idle Text
PIN Parameters

Service
Installation
Error Messages
Alarm Sounding
Alarm Wiring
Electronic Parts
Chassis Parts
Overrides

AuditLok XL 2008 - Manage Users

Enroll User

Up to 150 users may be enrolled. Any combination of permissions, keyed or keyless, are permitted.
Manager or Administrator:
1. Log In.
2. Manager Only: Select "SUPERVISORY".
3. Select "KEYS".
4. Select "ENROLL KEY".
5. Keyless Only: Select "KEYLESS". Make a note of the USER NUMBER assigned.
6. Key Only: Present an unenrolled key to the key reader.
7. Select a permission level.
8. Enter up to 9-digits for the PERSONAL ID, then select "DONE".
9. Enter the user's NAME: Select “UP LETTER” to scroll up through the alphabet ("DOWN LETTER" if you go past the desired character). Use the left/right scroll buttons to move to the next character.
10. Enter a 4-digit temporary PIN (1-1-1-1 is recommended).
11. Confirm the PIN.
12. New Manager or User: select which doors the new user may access.

Edit User Status

Use this procedure to activate and inactive user, set an active user to inactive, or delete a user. Once a user is deleted they cannot be activated again once you leave the status screen.
Manager or Administrator:
1. Log In.
2. Manager Only: Select "SUPERVISORY".
3. Select "KEYS".
4. Select "DISPLAY/EDIT USER".
5. Use the left/right scroll buttons to scroll through the list of users in the system.
6. Select "CHANGE STATUS".
7. Select the desired new status or "CANCEL" to leave the user unchanged.