FKI Tech Info

Configuration
Clock
Keys
Doors

Service
Error Messages
Alarms
Keys
Display
Power
Doors
Locknet Safes
Vin 1 Parts
Vin 2 Parts

Vindicator - Display Problems

Blank Display

1. Check power into the safe.
2. Remove the front panel and check for power.
3. Check the RJ-45 connection (Vin 2)
3. Adjust the comparison/contrast knob (on the rear of the outer board).
4. If there is still no display, replace the outer display board.

Scrambled Display (Vin I)

Reset the safe by powering off for 30 seconds and pressing the small recessed reset button (above or below the RJ-45 jack).