OperationChange PIN Open Door 1 Open Door 2 Armored Car User Chart Employee Count Add User Delete User View Audit Print Audit Configuration Time/Date Daylight Savings Delay Timelock Service Troubleshooting Error Message Parts List |
Sherlock - Open Inner DoorKey VersionThe inner door may be opened at any time, except when the idle display indicates Safe Timelocked. During timelock refer to Section 4.3.3 for Armor Car access. If your inner door is programmed with a delay, you must log in once, satisfy the delay requirements, then log in again during the access time to open both of the safe doors. Sherlock automatically unlocks the outer door when it unlocks the inner door so that you do not have to open the outer door separately. Only Employee and Store Manager keys may open safe doors.1. Present key. 2. Enter your 4 digit PIN code. 3. Select SAFE (press “1”). 4. Select INNER (press “2”). 5. The delay will begin to count upward. To cancel the delay, press “0.” 6. When the delay ends, the safe will beep and the access time will begin. The access time will count up on the screen while idle until the access time ends. You may terminate the access time count at any time by pressing “0.” 7. During the access time repeat steps 1 through 2 above. The safe will then indicate that it is unlocked and you may open both safe doors. The safe will only remain unlocked for about 5 seconds. To open, turn the handle and pull the outer door open, then reach in and turn the inner door knob and pull the inner door open. 8. After the safe doors are closed you may immediately reopen them as long as the access time is counting on the screen (follow Steps 1 through 2 above). You may terminate the access time count at any time by pressing “0.” 9. Close both safe doors and make sure the outer door handle rotates to the closed and locked position. Remove your key. The safe is again ready for normal use. 10. Regardless of whether the doors are open or whether they have been opened, the timer will reset when the access time ends and the delay must be satisfied from the beginning before the inner door may be opened again. Keyless VersionThe inner door may be opened at any time, except when the idle display indicates Safe Timelocked. If your inner door is programmed with a delay, you must log in once, satisfy the delay requirements, then log in again during the access time to open both of the safe doors. Sherlock automatically unlocks the outer door when it unlocks the inner door so that you do not have to open the outer door separately.1. Press any number on the keypad to begin. 2. Enter a 2 digit User Number. 3. Enter your 6 digit PIN code. 4. Select SAFE (Employees press “1” or Managers press “5”). 5. Select INNER (press “2”). 6. The delay will begin to count upward. To cancel the delay press “#.” 7. When the delay ends, the safe will beep and the access time will begin. The access time will count up on the screen while idle until the access time ends. You may terminate the access time count at any time by pressing “#.” 8. During the access time repeat steps 1 through 3 above. The safe will then indicate that it is unlocked and you may open both safe doors. The safe will only remain unlocked for about 5 seconds. To open, turn the handle and pull the outer door open, then reach in and turn the inner door knob and pull the inner door open. 9. After the safe doors are closed you may immediately reopen them as long as the access time is counting on the screen (follow Steps 1 through 5 above). You may terminate the access time count at any time by pressing “#.” 10. Close both safe doors and make sure the outer door handle rotates to the closed and locked position. The safe is again ready for normal use. 11. Regardless of whether the doors are open or whether they have been opened, the timer will reset when the access time ends and the delay must be satisfied from the beginning before the inner door may be opened again.
|
|||||
Copyright
©2009 Updated 4-24-09 |
||||||
