OperationChange PIN Open Door 1 Open Door 2 Armored Car User Chart Employee Count Add User Delete User View Audit Print Audit Configuration Time/Date Daylight Savings Delay Timelock Service Troubleshooting Error Message Parts List |
Sherlock - Outer Door TimelockSet Timelock - Key VersionTimelock settings include a lock time, unlock time, and a second lock time. Having two lock times allows for starting timelock after midnight if the previous day does not go into timelock before midnight. The second lock time allows the timelock to take effect before midnight. Enter 99:99 for either lock time to disable that lock time. The Area Manager (or Owner/Super) key is required to edit timelocks. Do not place the safe in 24-hour timelock or the safe will become completely unavailable. Do not set all times to 99:99. Every day must have at least 1 minute of timelock.1. Present AM (30) key. 2. Enter your 4 digit PIN code. 3. Select TIMELOCK SET (press “4”). 4. Select LOOK (press “1”). 5. The timelock settings for Sunday are displayed first. To make a change select CHANGE (press “2”). To keep the settings for this day of the week and move to the next day select NEXT (press “1”). In this example the first lock time is 99:99 because the previous night locked prior to midnight. If the safe is not going to lock before midnight, set the second lock time to 99:99 and set the proper first lock time on the next day of the week. 6. If you choose to change the timelock settings, AM and PM will be displayed at the bottom of the screen and the cursor will go to the beginning of the first lock time. Enter the time desired. Remember to use 12-hour time and select AM (“1”) or PM (“2”) for each line. 7. When all lines are entered NEXT and CHANGE will again appear at the bottom of the screen. Select NEXT (press “1”) to go to Monday. Repeat Steps 6 through 8 until all days are set. When you reach Saturday the display will instead say REVIEW and EXIT to let you know you have cycled through all days. 8. To end editing, select EXIT (press “2”) and remove your key. Set Timelock - Keyless VersionTimelock settings include a lock time, unlock time, and a second lock time. Having two lock times allows for starting timelock after midnight if the previous day does not go into timelock before midnight. The second lock time allows the timelock to take effect before midnight. Enter 99:99 for either lock time to disable that lock time. The Owner (User 30) and General Manager (User 29) are the only users with permission to edit timelocks. Caution: Timelock settings may only be edited while out of timelock (while System Ready is displayed at idle). Do not place the safe in 24-hour timelock or the safe will become completely unavailable. Do not set all times to 99:99. Every day must have at least 1 minute of timelock.1. Press any number on the keypad to begin. 2. Enter a 2 digit User Number. 3. Enter your 6 digit PIN code. 4. Select T/L SET (press “4”). 5. Select LOOK (press “1”). 6. The timelock settings for Sunday are displayed first. To make a change select CHANGE (press “2”). To keep the settings for this day of the week and move to the next day select NEXT (press “1”). 7. If you choose to change the timelock settings, AM and PM will be displayed at the bottom of the screen and the cursor will go to the beginning of the first lock time. Enter the time desired. Remember to use 12-hour time and select AM (“1”) or PM (“2”) for each line. 8. When all lines are entered NEXT and CHANGE will again appear at the bottom of the screen. Select NEXT (press “1”) to go to Monday. Repeat Steps 6 through 8 until all days are set. When you reach Saturday the display will instead say REVIEW and EXIT to let you know you have cycled through all days.
|
|||||
Copyright
©2009 Updated 4-24-09 |
||||||
