Easy 120Specs Installation Operation Theory Delay Settings Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Door Service Manual Drop Service Parts Easy 120V / 120A Specs Installation Operation Theory Programming Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Validated Drop Service Manual Drop Service Door Service Parts Smart Series Common Rules Audit Manage Users Open Door Vending Drops Reports Clock Setup Door Setup Vend Setup Validator Setup Location Setup Troubleshooting Keypad Replacement Parts List |
McGunn Smart Products - VendingVend One TubeSmart Safe, Mini Smart Safe, and Smart Cashier Models are equipped with a vending system.1. Enter combo. Press E. 2. Select Dispense Money. Press E. 3. The screen will read Tube# __ __. 4. Enter the desired tube (i.e. 02). Press E. 5. The screen will read Dispense Tube 02. Press E. Turn knob and tube will fall into tray on the front of the safe door. If you have a time delay set, you will have to wait for the time to count down before the safe will release the tube. Vend Multiple Tubes for a TillSmart Safe, Mini Smart Safe, and Smart Cashier Models are equipped with a vending system.1. Enter combo. Press E. 2. Select Dispense Money. Press E. 3. The screen will read Tube# __ __. 4. Enter the first column in the desired tube sequence (i.e. 01). Press E. 5. The screen will read Dispense Tube 01. Press E. Turn knob and tube will fall into tray on the front of the safe door. 6. To access the next tube in sequence, press E twice. 7. Turn the knob of the next dispenser. • Repeat steps 6 and 7 until all columns have vended. • One tube for each cartridge may be accessed at one time allowing cashiers to withdraw complete starting banks. • After all 8 tubes have been dispensed, the cashier will be denied additional tubes until the time delay has elapsed. Buy MoneySmart Cashier is equipped with validators and a vending system.1. Enter combo. Press E. 2. Select Buy Money. Press E. 3. The screen will read Insert Bill Now Deposited $00.00. 4. Feed bills into the validator(s). Press E after inserting all bills. 5. The screen will read Credit $20.00 Tube __ __ (example amount). 6. Enter the but number to dispense. Press E. Turn the dispense knob and vend out the requested tube. Repeat until credit is used up. 7. Press * to end and exit. Load TubesSmart Safe, Mini Smart Safe, and Smart Cashier Models are equipped with a vending system. The safe door must be opened in order to add tubes to magazines. Up to 13 tubes may be loaded into each magazine. After opening the outer door, the safe will prompt you to edit the tube count for each column.Quick Tube CountSmart Safe, Mini Smart Safe, and Smart Cashier Models are equipped with a vending system. At the idle screen: Press E twice and use the up/down arrow to check the number of tubes in each column. |
|
Copyright
©2009 Updated 5-5-09 |
||