Easy 120Specs Installation Operation Theory Delay Settings Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Door Service Manual Drop Service Parts Easy 120V / 120A Specs Installation Operation Theory Programming Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Validated Drop Service Manual Drop Service Door Service Parts Smart Series Common Rules Audit Manage Users Open Door Vending Drops Reports Clock Setup Door Setup Vend Setup Validator Setup Location Setup Troubleshooting Keypad Replacement Parts List |
McGunn Smart Products - Common RulesKeypad Operation• To Move the Cursor back — Press the left/right arrow key• To Scroll — Press the up/down arrow key • To Enter — Press the E key/which also advances the cursor • To Program Numbers — Press the number on the keypad • To Program Letters — Press each key repeatedly until the desired letter appears (i.e.: Press 4 three times to make the letter L) • To Leave Spaces — Press E • To advance the cursor from month to day to year (MM/DD/YY) or from hours to minutes (00:00) — Press E • To exit a current menu or to back out of menus to start over — Press * (i.e. Press* twice to return to Main Menu) • Zero — When programming users, dates, times, amount values, etc., always place a zero (0) before single digit numbers (i.e. 05, 07) • Time — Must be programmed in 24-hour military style (i.e. 03:00 is 3am and 17:30 is 5:30pm). Users• The Master User and Manager Users can add, delete and change values for clerk users.• Only the Master User can add, delete and change values for manager users. • User numbers 03 – 07 are reserved for manager users. • User numbers 08 – 49 are available for clerk users. • Clerk users can withdraw cash tubes and take audit readings. • Clerk users cannot open the safe door |
|
Copyright
©2009 Updated 4-28-09 |
||