Easy 120Specs Installation Operation Theory Delay Settings Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Door Service Manual Drop Service Parts Easy 120V / 120A Specs Installation Operation Theory Programming Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Validated Drop Service Manual Drop Service Door Service Parts Smart Series Common Rules Audit Manage Users Open Door Vending Drops Reports Clock Setup Door Setup Vend Setup Validator Setup Location Setup Troubleshooting Keypad Replacement Parts List |
McGunn Smart Products - Door ConfigurationTime LockUse extreme caution when setting the Time Lock. It is important not to lock yourself out of the safe. Setting the Time Lock will make the Safe Door and Main Programming Menu available only during the days and hours set by the programmer.1. Enter Master combo. Press E. 2. Select Master Menu. Press E. 3. Select Time Lock. Press E. 4. The screen will read View Settings. To view the existing time lock settings, press E. Use the up/down arrow key to select each day of the week (MO-SU). Press * to return to the main menu. 5. Select Set Time Lock. Press E. 6. The screen will read Open From 00:00 MO.........to 00:00 (It will be in 24-hour time) 7. Use the up/down arrow key to select the desired day of the week. Press E. 8. Enter the Open From time (when the safe can be first opened). • If you want the safe to be opened after 9am (09:00 Military Time), enter 0, 9, press E. Then enter 0, 0, press E. 9. Enter the Open to time (when the safe should lock down). • If you want employees locked out of the safe after 7:30pm (19:30 Military Time), enter 1, 9, press E. Then enter 3, 0, press E. • NOTE: The lock down period will last from the Open To time until the Open From time set for the following day. Repeat the process to set the Time Lock for each day of the week. 10. To exit to the Menu press *. 11. The screen will read, Are You Sure? E = YES * = No. • Press the * to exit to the Main Menu. • Press E and the Smart Safe will prompt you to reset the tube count. 12. The screen will read Reset Tube Count Tube#01 QTY = __ __ • If you have refilled the tubes or cartridges, enter the new information. For example, if there are 10 tubes in cartridge 01, enter 1, 0, press E. 13. The screen will read Reset Tube Value Tube#01… $0000.00 • Enter the amount of money in each tube. For example, if a cartridge contains tubes with roles of quarters, enter $10.00. If a cartridge contains tubes with 25 $5 bills, enter $125.00. 14. When the proper amount is entered, press E. 15. You will be prompted to enter the amounts for the next cartridge in order. DelayUse extreme caution when setting the Time Lock. It is important not to lock yourself out of the safe. Setting the Time Lock will make the Safe Door and Main Programming Menu available only during the days and hours set by the programmer.1. Log In (Master code). 2. Select Master Menu. Press E. 3. Select TDL Safe Door. Press E. 4. The Screen will read: Door #01 Time Delay = _ _. Press E. 5. Enter 0 0 for no time delay, or enter the desired Time Delay. Recommended Time Delay is 10 minutes. You must enter 2 digits for the time delay – even if your delay is 1 – 9 minutes. Press E. 6. The screen will read: Door #01 Open Window = 05 (Standard Open Window Period). Press E to accept, or enter a number between 01 and 15 minutes and press E to accept. 7. If the safe has an inner door under Smart control: The screen will read: Door#02 Time Delay = 10. Press E. Enter 1 0 for a 10 minute time delay, or enter the desired Time Delay. Recommended Time Delay is 10 minutes. Press E. 8. If the safe has an inner door under Smart control: The screen will read: Door #02 Open Window = 05 (Standard Open Window Period). Press * to return to the first screen of the Master Menu. |
|
Copyright
©2009 Updated 5-5-09 |
||