Easy 120Specs Installation Operation Theory Delay Settings Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Door Service Manual Drop Service Parts Easy 120V / 120A Specs Installation Operation Theory Programming Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Validated Drop Service Manual Drop Service Door Service Parts Smart Series Common Rules Audit Manage Users Open Door Vending Drops Reports Clock Setup Door Setup Vend Setup Validator Setup Location Setup Troubleshooting Keypad Replacement Parts List |
McGunn Easy 120V/120A - WiringWiring InfoArmored Cable: Red, Blue, and Black (power) to J26; Red and Black (+5V power) to LCD module, Blue and Black (+12V power) to validators, Gray harness (printer) to J4.Validators: Black, White, and Orange sets to J2 (channel 1) and J3 (channel 2). ACO Key Switch: Red and black wires to J22. LCD Module Data: Flat ribbon cable to J23. Keypad Membrane: Flat ribbon cable to J5. Vend Solenoids: Blue wire pairs to associated J7 connector. Lock: Orange and Black (top two wires of RJ45 at lock) to J7 LOCK1 connector. Vend Drop Sensor Transmitter: Yellow and Black wire harness to J21. Vend Drop Sensor Receiver: Yellow, Black, and Yellow wire harness to J25. Wiring DiagramClick to enlarge: |
|
Copyright
©2009 Updated 4-30-09 |
||