Easy 120Specs Installation Operation Theory Delay Settings Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Door Service Manual Drop Service Parts Easy 120V / 120A Specs Installation Operation Theory Programming Wiring Service Main Board Service Front Panel Service Power Service Vending System Service Validated Drop Service Manual Drop Service Door Service Parts Smart Series Common Rules Audit Manage Users Open Door Vending Drops Reports Clock Setup Door Setup Vend Setup Validator Setup Location Setup Troubleshooting Keypad Replacement Parts List |
McGunn Easy 120V - ValidatorsVector ValidatorsVector validators were used in early production. All units in the field have been (or should have been) upgraded to PUB-11 by now.PUB-11 ValidatorsJCM's PUB-11 validators are now used on all Easy120V production units. To access, open the validator door or open the main door. To replace, disconnect the cable at the head then pop the head open slightly, then pull genly to remove the validator head. The safe must be power cycled after reconnecting the head.Inner CompartmentThe inner compartment has a right-swing door with a simple 1/4 turn key lock. |
|
Copyright
©2009 Updated 5-1-09 |
||