FKI Tech Info

Easy 120
Specs
Installation
Operation
Theory
Delay Settings
Wiring Service
Main Board Service
Front Panel Service
Power Service
Vending System Service
Door Service
Manual Drop Service
Parts

Easy 120V / 120A
Specs
Installation
Operation
Theory
Programming
Wiring Service
Main Board Service
Front Panel Service
Power Service
Vending System Service
Validated Drop Service
Manual Drop Service
Door Service
Parts

Smart Series
Common Rules
Audit
Manage Users
Open Door
Vending
Drops
Reports
Clock Setup
Door Setup
Vend Setup
Validator Setup
Location Setup
Troubleshooting
Keypad Replacement
Parts List

McGunn Easy 120 - Delays

Door and Vend Delay Setting

On the main circuit board you will find an eight segment DIP switch marked S2. This DIP switch is used to adjust the DOOR DELAY and VEND DELAY values.
Default Values: By factory default it is configured with segments 2, 4, and 6 ON and all other segments OFF. This combination sets a 10 minute DOOR DELAY with a 2 minute VEND DELAY.
Custom Values: Delays are in units of minutes. With power off change the DIP switches to obtain the desired delay values. Turn power on and the electronics will recognize the new delay settings.

S2 Shown With Default Settings:

S2 DIP Switch Setting Charts

Door and Vend Delay Switch Setting Options:

Door Delay	Vend Delay