FKI Tech Info

ETD
Model 5031
System 1
System 2
System 3
Troubleshooting

Perfect Cash (PDF):
Maintenance Schedule
Cleaning
Clearing Jams

ETD 5031

History

This ETD package was used in the late 1980's, mainly by Aldi's and some Albertson's.

Initialization & Operation

1. Plug into AC power.
2. Wait at least 10 hours before attempting to use time delay (battery version).
3. Start the time delay: Turn key once right and back to center.
4. Cancel delay: Turn key once left and back to center.
5. To open the door during the access cycle: Turn the key to left position and hold 5 seconds.

Set Delay Time

Maximum delay is 40 minutes.
Switch 1 = +1 minute.
Switch 2 = +2 minutes.
Switch 3 = +4 minutes.
Switch 4 = +8 minutes.
Switch 5 = +10 minutes.
Switch 6 = +20 minutes.
Switch 7: ON = count down from time setting, OFF = count up from time setting.
Switch 8: ON = maximum timelock 15 hours, OFF = maximum timelock 144 hours.

Set Access Time

The maximum value is 10 minutes. A setting of higher than 10 minutes will result in an access time of 9 (odd value) or 10 (even value).
Switch 1 = +1 minute.
Switch 2 = +2 minutes.
Switch 3 = +4 minutes.
Switch 4 = +8 minutes.
Switch 5-8 = must be OFF.

Front Panel Facilities

1. Delay light indicates delay in progress.
2. Access light indicates access time is in progress.
3. Dash in first position (left side): Combination required.
4. Dash in second position: Timelock active.
5. Dash in third position: Ready to start delay cycle.
6. Dash in forth position: Aborted last function.

Images - Click to View Larger

Display:

Solenoid Mounting:

5031 Circuit Board: