FKI Tech Info

Operation
Key Types
Key Status
Enroll Key
Delete Key
Change PIN
Audit
Door Operation
Door Setup
Language
Time/Date

Service
Batteries
Troubleshooting
Parts List

Audit Verification Lock (AVL)

Enroll User Key

1. Insert Master Key.
2. Enter PIN.
3. Select Add Key (4 button).
4. Insert User Key to be enrolled.
5. If all 15 spaces are used you will be prompted to delete a key.
6. If the key is already enrolled you will be prompted to first delete the key.
7. Enter the unlock time to start access for the User Key.
8. Enter the lock time to end access for the User Key.
9. To allow 24 hour access leave the lock and unlock times 00:00 in steps 7 and 8.
10. Assign a temporary PIN (1111) and confirm.
11. If the display says REJECTED start over. Otherwise you are done. The PIN must be changed before the key may be used to open the safe.

Enroll Different Master Key

1. Insert old Master Key.
2. Enter PIN.
3. Select Add Key (4 button).
4. Insert new Master Key to be enrolled.
5. When prompted to CHANGE MASTER KEY select Yes (check button).
6. Assign a PIN and confirm.
7. The old Master Key is automatically deleted.
8. If the display says REJECTED start over. Otherwise you are done.

Enroll Super-Master Key

1. Obtain an enrolled User Key and verify it works before continuing.
2. Insert Super-Master Key.
3. Wait 3 seconds, then remove the Super-Master Key.
4. Insert User Key for verification
5. Enter PIN.
6. Confirm PIN.
7. When prompted to CHANGE MASTER KEY select Yes (check button).
8. Assign a PIN and confirm.
9. The old Master Key is automatically deleted.
10. If the display says REJECTED the Super-Master is useless and must be replaced. Otherwise you are done.

Enroll Armored Car Key

1. Insert Master Key.
2. Enter PIN.
3. Select Add Key (4 button).
4. Insert Armor Car Key to be enrolled.
5. If all 15 spaces are used you will be prompted to delete a key.
6. If the key is already enrolled you will be prompted to first delete the key.
7. Set the lock and unlock times to 00:01 for both doors so that the key is always locked out.
8. Assign a temporary PIN (1111) and confirm.
9. If the display says REJECTED start over. Otherwise you are done.
10. The PIN must be changed the first time it is used. After the first use, the Armor Car Key does not use require a PIN.

AVL