OperationLog in & Log Out Door Access Manual Drop Validate a Bill Validated Drop Insta-Drop Extended Drop Manage Users Change Your PIN Change All PINs About Reports Print Reports Service Electrical Connections Printer Paper Silencing the Buzzer Error Messages Troubleshooting Tips Request Repair via Keypad Configuration Definitions CMP Application Initial Field Setup Setup Reports Server Ping Test Network Settings Regional (Clock) Supervision Setup Supervision Test Supervise Manually Commercial State |
XLV-iP CT8016 - Changing Printer PaperChanging Printer Paper1. Remove the printer cover by pressing lightly and pushing toward the back (Fig. 5).2. Remove the roller from the printer (Fig. 6). 3. Insert the new roll, checking to see that the paper always comes from underneath (only one side of the paper is usable; Fig. 7). 4. Replace the roller in the printer. Make sure that sufficient paper is left to pass it through the slot of the printer cover (Fig. 7). 5. Replace the printer cover (reverse the process described in step 1). 6. Press the paper advance button to verify that the new roll is installed correctly. |
|
Copyright
©2002 Updated 4-16-09 |
||